The Measure of Quality
Product News


NEW PosiPatch Flexible Magnetic Ring for Salt Contamination Measurement on Small Diameters

All DeFelsko Bresle Method Patch options, including the PosiPatch™, are compatible with the PosiTector® SST Soluble Salt Tester or any existing conductivity meter.

Unlike existing Bresle method patches on the market, the reusable PosiPatch saves time and money. It has an air permeable membrane that allows for automatic air removal and uses safe, flexible dispensing tips instead of sharp needles.

The innovative PosiPatch attaches to steel surfaces using a unique magnetic ring. Like the Standard Magnetic Ring, the NEW Flexible Magnetic Ring leaves no messy adhesive residue to clean. Intended for pipes and other tight diameters, it allows the PosiPatch to form a tight, leak-free seal on inside and outside diameters greater than 10 cm (4 in.).*

The Standard Magnetic Ring continues to be included in all PosiPatch Kits and is the first choice for flat surfaces and curved surfaces with diameters greater than 1m (40 in.).

*Flexible Patch Minimum ID is 12 cm (4.5 in.)*

Learn more about the PosiPatch and additional Bresle Method Patch options here.

DeFelsko announces the new PosiTest® LPD Low voltage Pinhole Detector. It uses a wet sponge to detect holidays, pinholes and other discontinuities on metal and concrete substrates without damaging the coating. Supplied in a rugged inspection case, the easy-to-use PosiTest LPD includes everything needed for testing.

Important Features:

  • Lightweight, ergonomic design - while most other devices are box-shaped, the PosiTest LPD was specifically designed to fit comfortably in the hand with a balanced weight distribution
  • 4 voltage output options conform to international standards
  • Automatic self-test verifies voltage calibration
  • Regulated voltage outputs will not drop under load
  • GroundSense™ visibly reassures the user that the instrument is properly grounded
  • Common threads and connectors allow for use with existing paint roller extensions
  • Weatherproof, dustproof and shockproof - meets or exceeds IP65
  • Long Form Certificate of Calibration included

Additional Information


DeFelsko is pleased to announce the immediate availability of the new PosiTector® SST Soluble Salt Tester for measuring the concentration of soluble salts on metal surfaces.

Additional Information


New! PosiTector SHD Shore Hardness Durometer

DeFelsko proudly introduces the new PosiTector SHD Shore Hardness Durometer. The PosiTector SHD measures the indentation hardness of non-metallic materials such as polymers, elastomers and rubbers. In the corrosion industry, durometers are commonly used to ensure proper curing of pipeline repair wraps. Two models are available for different hardness ranges - Shore A and Shore D.

PosiTector SHD Features

  • User-adjustable measurement time with onscreen countdown to conform to national and international standards
  • Internal memory, statistics and USB port
  • Certificate of Calibration showing traceability to NIST included
  • Auto Ignore mode disregards readings below 20 or above 90 per international standards
  • HiLo alarm audibly and visually alerts when measurements exceed user-specified limits
  • Includes test block to verify operation
  • Compatible with PosiSoft suite of solutions, including the updated PosiTector App
  • Compatible with all PosiTector Advanced and PosiTector Standard gage bodies with a color display. Simple gage update required.

Additional Information


Introducing the PosiTector 6000 FNDS Probe

We are pleased to announce a new addition to the PosiTector series of coating thickness gages, the PosiTector 6000 FNDS probe for duplex coating systems applied to steel substrates. The PosiTector 6000 FNDS probe simultaneously measures and displays the individual layer thicknesses of zinc and paint in a duplex coating system.

PosiTector 6000 FNDS Probe Features

  • Measures and displays the individual layer thicknesses of zinc and paint in a duplex coating system with a single reading
  • Ideal for measuring the three types of zinc used in duplex coating systems - hot-dip, electro and zinc spray metallizing (thermal spray zinc)
  • When taken out of duplex mode, the instrument can be used as a conventional ferrous/non-ferrous gage to measure the thickness of coatings on ferrous or non-ferrous metal substrates
  • Scan mode - Take continuous readings without lifting the probe (Advanced models only)
  • Compatible with all PosiTector Advanced and PosiTector Standard gage bodies with a color display. Simple gage update required.

Additional Information


NEW! PosiTest® AT-A Automatic Adhesion Tester

We are excited to announce the redesigned PosiTest AT-A Automatic Adhesion Tester. The PosiTest AT series measures the adhesion of coatings to metal, wood, concrete and other rigid substrates.

NEW PosiTest AT-A Automatic Features

  • Impact and scratch resistant color Touch Screen with keypad for operation with or without gloves
  • User adjustable pull rate, pull limit and hold time
  • Internal memory stores maximum pull-off pressure, rate of pull, test duration, dolly size, pass/fail, the nature of fracture and user notes for 100,000 pulls in up to 1,000 batches
  • Wirelessly communicate with your smart device using our free app - create and share customized, professional PDF reports
  • Record the results as pass/fail and the nature of fracture - cohesive, adhesive and glue failures 
  • Rubberized, shock absorbing grips also provide a stable, skid-resistant footing
  • and more...

Additional Information

What's New]
[Products ] [Service & Support] [Join our Team]
[Terms & Conditions] [Privacy] [Resources] [Contact Us]
[Site Map]

©2017 DeFelsko Corporation.