PosiPen^®

Magnetic pull-off thickness gage measures non-magnetic coatings such as paint, enamel,
plating, & hot-dip galvanizing on steel.

PosiPen can be placed with pin-point accuracy on any location of the part to be measured which other Gages are not able to reach.

PosiPen measures:

on hot surfaces
on small surfaces
in different positions

PosiPen has a very small unique magnet and therefore can measure on extremely small parts, on peaks and valleys.

PosiPen is manufactured in three versions:

PosiPen Model A for measurements on surfaces with normal temperatures

PosiPen Model B for measurements on surfaces with extreme temperatures (between -150°F and +450°F or -100°C and +230°C)

PosiPen Model C ferrite comparator

PosiPen A and B have two scales, microns (metric) and mils (inch)

PosiPen - Coating thickness gage for non-destructive measurement of non-magnetic coatings (paint, enamel, plastic, galvanizing, metalizing, plating, & more) on steel

Range: 0.25 to 20 mils (inch)
Tolerance ±10% and 0.1 mil

Range: 5 to 500 microns (metric)
Tolerance ±10% and 2.5 microns

PosiPen A and B are calibrated to NIST calibration standards.

Download Literature: PosiPen Contact Us: Rapid Response Form

PosiPen®

PosiPen^®