|
Pictured: STDA3 for B probe |
Certified Thickness Standards
Used to verify the accuracy and operation of coating thickness gages and are an important component in fulfilling both ISO/QS-9000 and in-house quality control requirements.
Contracts often specify that coating thickness measurements be taken by gages whose measurement accuracy is traceable to a National Metrology Institute such as NIST or PTB.
STDA3 |
B probes |
|
STDP6 |
C probes |
STDP1 |
D probes |
|
|
 |
Certified Plastic Shims
- Certified shims provide an economical alternative to Coated Metal Plates but have a reduced accuracy
- Shims are packaged in a protective pouch
- Certificate of Calibration showing traceability to NIST is included with each shim or set of shims
- Certified and labeled in both Metric and Imperial units
- More Information
|
|
 |
Ultrasonic Couplant
Every PosiTector 200 ships with (1) bottle of Ultrasonic couplant. Additional 4oz. bottles are available.
(sold in cases of 12). MSDS |
|
 |
PosiTector SPG Surface Profile Probes
The PosiTector 200 body universally accepts all SPG surface profile probes. Ideal for measuring and recording peak to valley surface profile heights.
More Information |
|
 |
PosiTector 6000 Coating Thickness Probes
The PosiTector 200 body universally accepts all 6000 coating thickness probes. Ideal for measuring coatings applied to all metal subrates
Select from a variety of measurement ranges and probe styles to suit your application.
More Information |
|
 |
PosiTector DPM Dew Point Meter probes
The PosiTector 200 body universally accepts all DPM dew point meter probes. Ideal for measuring environmental conditions outdoors and indoors.
Measures and records: Relative humidity,
air temperature,
surface temperature,
dew point temperature
and difference between
surface and dew point
temperatures.
More Information |
 |
Bluetooth Printer receives
data from Advanced models
- Receives data via Bluetooth wireless technology.
- Prints readings and statistical summary
- Battery-operated
- Light weight
- One year Warranty
Bluetooth Transfer Overview  |
|
|
AC Power Cable for
continuous operation or battery charging
This kit supplies several alternate power solutions
for your battery-operated PosiTector. They allow the gage to operate continuously
without the need for batteries.
Use the cable alone
to connect a PosiTector to your PC's built-in USB
port that acts as a continuous power source. Or connect
the cable to the included power adaptor which plugs
into any AC wall electrical outlet, 110 or 220V.
A selection of electrical plugs is included which
are capable of dealing with most country’s
outlets.
|
|
 |
PosiTector Case
Convenient hard shell case for carrying a PosiTector gage body and multiple probes - including any of the PosiTector 6000 Coating Thickness probes, DPM Dew Point Meter probes, SPG Surface Profile probes, or UTG Ultrasonic Wall Thickness probes.
Case has compartments for Certificates of Calibration, instruction manuals and other accessories. |
|
 |
Rechargeable Batteries
- eneloop HR4UTG (NiMH 800 AAA 1.2V)
- Precharged and ready to use immediately
- Considerably longer run time than conventional Nickel Cadmium batteries
- Low self-discharge: once charged, eneloop rechargeable batteries keep 90% of their charge after 6 months and 85% after 12 months
- High performance at low temperatures down to -10 °C
- No charger required - Recharge batteries inside the PosiTector when connected via USB.
- eneloop website: http://www.eneloop.info
|
|
|
Protective Lens Shield
- Pack of five thin plastic lens shields
- Ideal for protecting the PosiTector display from paint overspray.
One lens shield is included with every PosiTector instrument |
