Loading fixtures, pull stubs for testing the bond strength of coatings to metal, wood, concrete and other rigid substrates. For use with the PosiTest AT series of adhesion testers. Additional dollies available for conforming to ASTM C1583 (tensile strength of concrete overlays) and BS EN 12004 (cementitious adhesives). Multipacks offer larger quantities at a reduced cost.
.png)
Ideal for testing the adhesion of higher bond strength coatings on metals > 3.4 MPa (500 psi)
PosiTest AT-M: 0.7 to 20 MPa / 100 to 3,000 psi
PosiTest AT-A: 0.7 to 24 MPa / 100 to 3,500 psi / 220 to 7,550 N
100
DOLLY20
10
DOLLY20APK100
.png)
Ideal for testing the adhesion of lower bond strength coatings on wood, concrete, and plastic
PosiTest AT-M: 0.1 to 3.3 MPa / 16 to 480 psi
PosiTest AT-A: 0.1 to 3.8 MPa / 16 to 560 psi / 220 to 7,550 N
50
DOLLY50
4
DOLLY50APK50
.png)
Ideal for testing adhesion of very high bond strength coatings on metals. Compatible with PosiTest AT 20 mm Stand-off
PosiTest AT-M: 1.4 to 40 MPa / 200 to 6,000 psi
PosiTest AT-A: 1.4 to 50 MPa / 200 to 7,000 psi / 220 to 7,500 N
100
DOLLY14
10
DOLLY14APK100
.png)
Ideal for testing adhesion of very high bond strength coatings on metals. Compatible with PosiTest AT 20 mm Stand-off
PosiTest AT-M: 2.8 to 70 MPa / 400 to 10,000 psi
PosiTest AT-A: 2.8 to 96 MPa / 400 to 14,000 psi / 220 to 7,500 N
100
DOLLY10
10
DOLLY10APK100
.jpg)
Ideal for testing the bond strength of concrete surfaces and cementitious overlays per ASTM C1583 and EN 1542
PosiTest AT-M: 0.1 to 3.3 MPa / 16 to 480 psi
PosiTest AT-A: 0.1 to 3.8 MPa / 16 to 560 psi / 220 to 7,550 N
%20(1).jpg)
Ideal for testing cementitious tile adhesives per EN 12004-2
PosiTest AT-M: 0.1 to 2.585 MPa / 13 to 375 psi
PosiTest AT-A: 0.1 to 3.0 MPa / 13 to 440 psi / 220 to 7,550 N
4
DOLLY50T
4
PLATE50T
†50 x 50 mm Dolly comes complete with qty. 4 plates and reusable threaded posts. Additional Plates are available separately.
For use with the PosiTest AT
.jpg)
%20(1).jpg)
