PosiTector Gage Bodies

PosiTector Gage Bodies can be used with all PosiTector probes. Choose from Standard or Advanced models.

Standard Models

  • Storage of 250 readings—stored readings can viewed or downloaded

Advanced Models

  • Storage of 100,000 readings in up to 1,000 batches
  • Batch annotation—add notes and change batch names with onscreen QWERTY keyboard
  • WiFi technology wirelessly synchronizes with and downloads software updates
  • Data transfer via USB to a PC or via Bluetooth Wireless Technology to a mobile device, PC or printer
  • Store thickness, profile, environmental, wall thickness, hardness and salt contamination measurements in individual batches

Includes protective rubber holster with belt clip, wrist strap, 3 AAA batteries, nylon carrying case with shoulder strap, protective lens shield, USB cable and two (2) year warranty.

To see if your probe is compatible with a new gage body, see our Probe Compatibility page.

Probes sold separately.

Order Code
Add To Quote

PosiTector Standard Gage Body


PosiTector Advanced Gage Body

For use with the

Related Accessories

PosiTector Gage BodiesPosiTector Gage Bodies

PosiTector Gage Bodies can be used with all PosiTector probes. Choose from Standard or Advanced models.

Learn MoreLearn More
PosiTector ProbesPosiTector Probes

PosiTector bodies accept all PosiTector probes easily converting from a coating thickness gage to a surface profile gage, dew point meter, soluble salt tester, hardness and ultrasonic thickness gage.

Learn MoreLearn More
PosiTector DPM LPosiTector DPM L

Dew Point Meter Logger attaches to steel structures to measure and record environmental parameters independently for up to 200 days.

Learn MoreLearn More
Bluetooth PrinterBluetooth Printer

Battery-operated and light weight, this Bluetooth Printer prints readings and statistical summaries via Bluetooth from Advanced models.

Learn MoreLearn More
Certified Thickness StandardsCertified Thickness Standards

Verify accuracy/operation of coating thickness gages. Important component of fulfilling both ISO/QS-9000 and in-house quality control requirements with a measurement accuracy traceable to NIST or PTB.

Learn MoreLearn More
PosiPatch Starter KitPosiPatch Starter Kit

For use with existing conductivity meters. Try the revolutionary, reusable PosiPatch with a low cost trial pack.

Learn MoreLearn More
Certified Step BlocksCertified Step Blocks

Ideal for checking calibration and operation of ultrasonic thickness gages and are an important component in fulfilling both ISO and in-house quality control requirements.

Learn MoreLearn More
Certified Plastic ShimsCertified Plastic Shims

Economical alternative to Coated Metal Plates, with a reduced accuracy. Ideal for protecting the PosiTector probe tip.

Learn MoreLearn More
Flexible Magnetic RingFlexible Magnetic Ring

Like the Standard Magnetic Ring PosiPatch, the NEW Flexible Magnetic ring leaves no messy adhesive residue to clean but is intended for pipes and other tight-diameters.

Learn MoreLearn More
PosiTector CasePosiTector Case

Convenient hard shell case for carrying a PosiTector gage body and multiple probes

Learn MoreLearn More
PosiTector SST Abrasives Test KitPosiTector SST Abrasives Test Kit

Measures the concentration of water-soluble contaminates in blast cleaning abrasives

Learn MoreLearn More
Testex™ Press-O-Film™ Replica TapeTestex™ Press-O-Film™ Replica Tape

50 pieces (impressions) per roll

Learn MoreLearn More
Telescopic Probe ExtenderTelescopic Probe Extender

A lightweight, portable device that allows you to extend the reach of your PosiTector 6000 regular cabled probes.

Learn MoreLearn More
AC Power KitAC Power Kit

Use for continuous operation or battery charging. This kit supplies several alternate power solutions for your battery-operated PosiTector. Operate your gage without the need for batteries.

Learn MoreLearn More
Certified PosiTector RTR Shim SetCertified PosiTector RTR Shim Set

Used to verify the accuracy and operation of PosiTector RTR and other spring micrometer replica tape readers

Learn MoreLearn More
Pelican Cases for PosiTector Inspection KitsPelican Cases for PosiTector Inspection Kits

Heavy-duty, waterproof Pelican cases complete with a custom foam insert to securely hold your PosiTector instrument.

Learn MoreLearn More
Deionized WaterDeionized Water

Purified, ion-free water, 250 ml or 1 l

Learn MoreLearn More
Ultrasonic CouplantUltrasonic Couplant

Every PosiTector 200 and PosiTector UTG ships with (1) bottle of Ultrasonic couplant.  Additional 4oz. bottles are available (sold in cases of 12). MSDS

Learn MoreLearn More
Certified Conductivity StandardCertified Conductivity Standard

To verify probe accuracy

Learn MoreLearn More
Burnishing BallBurnishing Ball

For best results when acquiring a 2D/3D parameters and images, it is recommended to use the supplied burnishing ball instead of the stainless-steel burnishing tool.

Learn MoreLearn More
PosiTector RTR Check ShimPosiTector RTR Check Shim

Used to check PosiTector RTR peak height accuracy (RTR H and RTR 3D). One check shim is included with each probe.

Learn MoreLearn More
Replica Tape HolderReplica Tape Holder

For best results and to minimize the migration of adhesive from the tape to the probes measurement system, DeFelsko recommends using the supplied tape holder.

Learn MoreLearn More
PosiTector SHD Test BlocksPosiTector SHD Test Blocks

Ideal for checking the operation of durometers.

Learn MoreLearn More
Surface Cleaning PuttySurface Cleaning Putty

To clean the test surface of debris prior to burnishing

Learn MoreLearn More
Cleaning CardsCleaning Cards

Pre-moistened with isopropyl alcohol to clean residual adhesive and debris from the anvils helping to insure an accurate test.

Learn MoreLearn More
PosiTector SHD Test StandPosiTector SHD Test Stand

Helps reduce operator influence by ensuring the probe is placed perpendicular in a controlled, repeatable way.

Learn MoreLearn More
PosiTector SHD Universal AdapterPosiTector SHD Universal Adapter

For use with threaded mounts in other test stands and calibrators.

Learn MoreLearn More
PosiTector SHD VerifierPosiTector SHD Verifier

The PosiTector SHD Verifier is ideal for checking accuracy and operation of Shore hardness durometers and is an important component in fulfilling both ISO and in-house quality control requirements.

Learn MoreLearn More
K-type Thermocouple SensorsK-type Thermocouple Sensors

Hand-held Surface Temperature Probe and Liquid Temperature Probe. For use with PosiTector DPMS probes only.

Learn MoreLearn More
Stainless Steel Burnishing ToolStainless Steel Burnishing Tool

Round-end (Ø8 mm) rubbing tool to compress replica film on the blasted surface.

Learn MoreLearn More
Probe Fixture StandProbe Fixture Stand

Helps reduce adverse operator influence by ensuring the probe is placed perpendicular to the part’s surface in a controlled, repeatable way.

Learn MoreLearn More
Non-Certified Metal Shim & Glass Zero PlateNon-Certified Metal Shim & Glass Zero Plate

Provides a quick accuracy check of the instrument and allows the user to perform practice measurements

Learn MoreLearn More
Replacement Tungsten Carbide Probe TipsReplacement Tungsten Carbide Probe Tips

Replacement probe tips - 2 angles available: 60° or 30° 

Learn MoreLearn More
Probe Foot RingsProbe Foot Rings

Ideal for use on thin, soft coatings to protect unnecessary wear while using Scan or Fast mode to measure large objects

Learn MoreLearn More
Protective Lens ShieldProtective Lens Shield

Pack of 5 thin plastic lens shields to protect PosiTector display from paint overspray. One lens shield included in every PosiTector purchase.

Learn MoreLearn More
PosiTector RTR Check TapePosiTector RTR Check Tape

Used to check the operation of PosiTector RTR 3D peak density measurement (for use with the PosiTector RTR 3D only).

Learn MoreLearn More
Rechargeable BatteriesRechargeable Batteries

Precharged batteries ready to use with a considerably longer run time than conventional Nickel Cadmium batteries. High performance in low temperatures and no charger required.

Learn MoreLearn More
Certified SPG StandardsCertified SPG Standards

Used to verify the accuracy and operation of surface profile depth micrometers

Learn MoreLearn More
Certified Polystyrene BlocksCertified Polystyrene Blocks

Certified Polystyrene Blocks are for use with gages that measure over 1500 µm (60 mils).

Learn MoreLearn More
Test DisksTest Disks

For verifying the operation of Barcol hardness impressors. Choose from hard or soft aluminum alloys. (Pack of 5)

Learn MoreLearn More
Replacement Glass PlateReplacement Glass Plate

For zeroing worn or replaced indentors on the PosiTector BHI.

Learn MoreLearn More
Replacement IndentorsReplacement Indentors

Includes additional spare indentor tips (2pk) with replacement tool for the PosiTector BHI.

Learn MoreLearn More
Non-Certified Plastic ShimsNon-Certified Plastic Shims

Provide a quick operational check of the instrument by allowing the user to perform practice measurements

Learn MoreLearn More
Large V-groove AdaptorLarge V-groove Adaptor

For enhanced stability on 30 - 45 cm (12 - 18") OD pipes (for PosiTector SPG OS only).

Learn MoreLearn More

Reusable patch with Standard or Flexible magnetic ring

Learn MoreLearn More
DeFelsko Adhesive PatchDeFelsko Adhesive Patch

Self-adhesive, polyurethane patches

Learn MoreLearn More
Latex Adhesive PatchLatex Adhesive Patch

Latex patch with easy-open tabs and low-tack adhesive for easy removal

Learn MoreLearn More
Kensington LockKensington Lock

Optional Kensington Lock keeps the PosiTector DPM L safe and secure

Learn MoreLearn More
View More Accessories